JP AdventurAir 12'0 Inflatable SUP Board 2020

£1299.00
This item is currently out of stock

The 2020 AdventurAir 12'0 can do it all - windsurf, white water paddling, fishing and touring. The Scotty mounts for fishing rods, the mast plug for windsurfing, the wide array of bungee straps, D-rings and handles, AdventurAir has it all! The quad setup with four 3” short soft fins is there for those shallow river pockets or white water action. You can add the middle fin for added traction and a center fin for better upwind performance while windsurfing.

Design details

SIZE: 12'0"x36"x6"

EXPANDING FRONTIERS

TARGET GROUP: Beginners to advanced

SUITABILITY: Adventure - windsurf, white water paddling, fishing and touring

The AdventurAir can do it all - windsurf, white water paddling, fishing and touring. The Scotty mounts for fishing rods, the mast plug for windsurfing, the wide array of bungee straps, D-rings and handles, AdventurAir has it all! The quad setup with four 3” short soft fins is there for those shallow river pockets or white water action. You can add the middle fin for added traction and a center fin for better upwind performance while windsurfing.

PACKAGE INCLUDES:

  • JP AdventurAir 12'0 Inflatable SUP Board
  • Adventure Edition Roller Bag
  • 2x Fins
  • Pump
  • FREE 3-piece Paddle
  • FREE Leash

BOARD SPEC:

Length (cm) 366
Width (cm) 91
Thickness (Inch/cm) 6“/15.2
Vol. (Liters) 405
Weight (kg/lbs) 13.5/29.7
Center Fin (PE) 9.0“ & 10.0" center fins + 4x 3" fixed fins

PRE-LAMINATION

Our Triple Layer Composite and our Double Layer constructions both include the specially developed process of pre-lamination. This high tech process consists of machine-lamination of the multiple layers into a shell that has accurate thickness as well as superior abrasion and stretch properties. Compared to normal double layer boards we have been able to remove the manual glue application from the process and with it the room for error, the excess weight of the glue and the additional health hazards for our workers. The fiber reinforced layers create super strong and durable boards with a minimal amount of stretch.

3D STRINGER

The 3D stringer is the most innovative solution to increase the stiffness of an inflatable board. It connects the deck, rail and bottom into one strong and solid U-beam. This has increased the stiffness of the boards up to 30%. Furthermore, the 3D Stringer increased the glued overlap surface in the high stress standing area, increasing the safety of the boards.