Fanatic Aero Carve Carbon Foil 2023
IN A NUTSHELL...
Fanatic's new range of mid to low aspect Aero Carve Wings is designed for the ambitious rider looking for direct and playful turning response in the waves and aggressive pop for air moves.

Design details
AERO CARVE RANGE CARBON
SIZES: 750 / 900 / 1150 / 1400
At first glance you might think the Aero Carve range goes totally against the trend. There’s more and more high aspect wings for pumping and improved glide out there, whilst these new Carve wings are in the mid to low aspect range - but that’s exactly one of the reasons our team loves them so much! The shorter span offers direct response to steering and follows commands very intuitively and with a forgiving nature. The control you have over these wings makes you carve harder and with more control from the first wave you pick. The wing recovers effortlessly when breaching and landings are smooth and easy, so you’ll be popping back up in flight mode right away. The curved centre with wider chord offers aggressive pop for jumping and the reflexed horizontal tips are neutral when getting some air on hard carves. The Aero Carve is the pick of most our team riders not only in the waves, but also for radical freestyle action.
Aero Carve Foil 750: 750 front wing / 216 back wing Our smallest and most radical setup for all lighter riders and advanced foilers up to about 85kg, handling also faster and more powerful surf
Aero Carve Foil 900: 900 front wing / 216 back wing The go-to setup for many of our team riders offers a great combination of speed, lift and pop, covering riders between 50-95kg up to medium size surf
Aero Carve Foil 1150: 1150 front wing / 250 back wing Early take off and great lift offering tight carves also in softer and smaller surf. Mid sized to heavier riders with advanced level will love this combo!
Aero Carve Foil 1400: 1400 front wing / 250 back wing Earliest take off and maximum lift combined with tight carving experience for all heavier riders
Choose your Carbon mast length and Carbon fuselage depending on your skills, preferred discipline and the conditions:
Mast options:
- 60cm – special size for shallow waters
- 75cm – All-round / Entry / Freestyle
Go-to size for most Wing Foilers on lakes, great to start and very compact for progressive air moves. Prone and SUP Foilers of all levels in small surf. - 82cm – All-round / Surf / Freestyle / Downwind
"One for all" mast for Wing Foilers looking for the perfect mix of being compact for freestyle, yet having length for surfing and swell. Prone and SUP Foilers in medium surf. Freestyle Windsurf Foilers.
- 82cm Fanatic x Duotone COLLAB – Surf / Freestyle
Our High Modulus Team Edition Mast for Wing Foilers looking for the highest level in performance. Based on the Duotone SLS Kite mast profile with High Modulus Carbon layup, this mast is for the ambitious rider using constantly wings below 100cm span.
- 90cm – Freeride / Surf / Downwind
Wing Foilers looking for the extra room for comfort in chop, surf and open ocean swell. Go-to size for Windsurf Foilers.
- 105cm – Freerace
Wind and Wing Foilers looking for an extra long mast for confidence to push speeds even in rough open ocean conditions.
Fuselage options:
- 68cm – “Advanced” – Surf / Freestyle
Advanced Wing Foilers looking for a playful ride with responsive turning and great pop for air moves. Advanced Prone and SUP Foilers. - 78cm – “All-round” – Entry / Freeride / Pump
Wing Foilers of all levels progressing from entry to advanced, with the option to adjust to their level, as well as Wingers with race ambitions. Prone, SUP and Pump Foilers looking for an easy and stable ride with great pumping abilities.
- 90cm – “Windsurf” – All-round Windsurf Foilers of all levels looking for an easy and stable ride with great control also at higher speeds.
Tech specs
Foil | Aero Carve Range Carbon 750 | Aero Carve Range Carbon 900 | Aero Carve Range Carbon 1150 | Aero Carve Range Carbon 1400 |
FRONT WING SIZE CM² | 750 CM² | 900 CM² | 1150 CM² | 1400 CM² |
BACK WING SIZE CM² | 216 CM² | 216 CM² | 250 CM² | 250 CM² |
FRONT WING SPAN | 63 cm | 70 cm | 78 cm | 86 cm |
FRONT WING ASPECT RATIO | 5.2 | 5.2 | 5.2 | 5.2 |
FUSELAGE OPTIONS | 68 cm / 78 cm (Wing / SUP / Prone) 90 cm (Windsurf) | 68 cm / 78 cm (Wing / SUP / Prone) 90 cm (Windsurf) | 68 cm / 78 cm (Wing / SUP / Prone) 90 cm (Windsurf) | 68 cm / 78 cm (Wing / SUP / Prone) 90 cm (Windsurf) |
MAST OPTIONS | 60 cm / 75 cm / 82 cm / 90 cm / 105cm | 60 cm / 75 cm / 82 cm / 90 cm / 105cm | 60 cm / 75 cm / 82 cm / 90 cm / 105cm | 60 cm / 75 cm / 82 cm / 90 cm / 105cm |
MAST MOUNTING | TRACK FOIL MOUNT | TRACK FOIL MOUNT | TRACK FOIL MOUNT | TRACK FOIL MOUNT |
FRONT WING SCREWS | M8x25 Torx | M8x30 Torx | M8x30 Torx | M8x35 Torx |
BACK WING SCREWS | M6x20 Torx | M6x20 Torx | M6x20 Torx | M6x20 Torx |
AERO CARVE RANGE CARBON
MID TO LOW ASPECT
Modern mid to low aspect designs with fast profiles offering direct turning behaviour
WINGS
Carbon front and back wings with 30° layup for maximum performance with direct flex response and minimal weight
DRAG REDUCED
Mast profile with 14% drag reduction compared to standard profiles
SCREWS
M8 & M6 Torx screws plus tools
FULLY INTERCHANGABLE
Wings and fuselages fully interchangeable between Aero Carve, Aero High Aspect, Aero Lift and the Flow wings with the new mount.
BULLETPROOF CONNECTIONS
Fuselages with extra large mounting area without pockets for bulletproof connections and maximum load spread – without getting stuck
WEDGES
Individual tuning through supplied wedges – changes angle of attack
BASEPLATE
Track foil mount system base plate – fits most foilboards
REDUCED WEIGHT
New Carbon masts and fuselages reducing the weight of your foil by about 25% compared to AL 3.0 mast/fuselage combos
ACCESSORIES
AERO BAG
Mast/Fuselage sets come with new Aero Foil Bag including covers for safe transport of your foil and all accessories.
COVERS
Wing sets are delivered in covers