Core Ripper 5 Kite Surfboard

ALLROUND / MEDIUM WAVE

SIZES
5’4″ – 18 1/2″ | 2″ | 22,6L | 50 – 75 kg
5’8″ – 19″ | 2 1/8″ | 26L | 65 – 90 kg
5’11” – 19 5/16″ | 2 3/16″ | 29L | > 80 kg

COMES WITH:
The Ripper 3 comes standard with a CORE Rear Traction Pad, Leash Plug and FCS II fin boxes.

FINS NOT INCLUDED

With its shortboard outline complemented by elements of a fish shape and the progressive rocker, the Ripper 5 is ideal for every wave kiter and any wave from small waves to steep overhead breakers.

SHAPE

HYBRID-SHAPE
The fusion of a shortboard and fish outline, featuring a generous center width and ample front-area volume, guarantees good gliding properties and extremely good tilt stability. The Mini Swallow Tail ensures the smoothest behavior in wide turns, and the possibility to push tight turns into the wave.

TUCKED-UNDER-RAILS
The hand-shaped rails feature a progressively tucked-under step, enhancing agility and providing ideal conditions for dynamic rail-to-rail surfing.

PROGRESSIVE ROCKER
The Ripper has a three-stage progressive rocker with a flat center section – ideal for bottom turns with maximum speed and perfect precision over the tail when the board is pushed into the corner.

MONO CONCAVE HULL
The underbody of the Ripper is adorned with a subtle Mono concave, which ensures strong gliding properties and maximum guidance in turns.

CONSTRUCTION

CLASSIC. DYNAMIC. ROBUST.
Professional surfers swear by this design: a PU core, enclosed by a laminate made of fiberglass and epoxy. It stands for a dynamic riding experience with pronounced flex values and pleasant smoothness. Our multi-layer fiberglass laminate is processed with high-performance resin, which promises perfectly shaped rails and a classic surf feeling.

DOUBLE STRINGER
A wooden stringer runs along the central axis in the core, which takes over flex control in the longitudinal direction and gives the ripper its unique riding experience. A second, overlying wooden stringer accommodates the inserts for the foot straps.

CARBON REINFORCED TAIL
The tail patch has been reduced in size on all models, making the board lighter and maintaining a good flex in the tail. The important parts remain perfectly reinforced.

STRAP-READY
Thanks to the V4A stainless steel inserts laminated into the deck, you are free to decide whether you want to ride your Ripper with or without straps.

THRUSTER FIN SETUP
Thruster setups stand for high agility and allow for tight turns. In addition, they detach easier from the water during radical maneuvers on the wave lip than quad setups.

ORIGINAL FCS II FIN SYSTEM
The FCS-II system allows the fins to be changed within a few seconds – without the need for tools. Of course, older generations of FCS fins can also be mounted with a grub screw.