Peter Lynn Aero V2 Foil Kite

SIZES: 6 / 8 / 10 / 12 / 14 / 15 / 16 / 18 / 21m

HIGH PERFORMANCE RACING FOIL

The Peter Lynn Aero v2 is designed to be the ultimate super GT amongst race kites. It combines blistering pace and acceleration with rider oriented responsiveness, dynamic handling, and unmatched stability. The Aero is built to open the door to a new level of engagement between rider and wing.

PETER LYNN AERO V2 CHARACTERISTICS

LARGE WINDRANGE
Built with only high tech, ultra light weight materials the Aero V2 performs in the lightest of breezes, yet it's sophisticated design and large depower range assure you remain in control when the wind picks up. Feel in control, always.

DIMENSIONALLY STABLE
Fully depowered on the bar and cleat, almost only supported by the A bridles, the kite stays in shape and in the air and this stability directly translates into acceleration and forward speed. Next to that it allows the kite to gently drift along during those long and smooth downwind turns.

RAZORSHARP UPWIND DRIVE
Designed with racing in mind the Aero is tuned as sharp as possible without sacrificing stability. Positioned at the edge of the wind window the kite delivers thrilling speed and an hard matched upwind drive.

RACING TO THE PODIUM
Competitions are no match against the Aero V2. Top of the line when it comes to all kinds of racing, whether it be hydro-foiling around Caribbean islands, snowkiting in the toughest and coldest conditions, or buggying on muddy shores. The Aero V2 will always make you speed through the finish line and end up on the podium.

TECH SPECS AERO V2

INNOVATIVE PANEL SHAPING
To truly think outside the box in kite design, one has to think outside of the possibilities that specialised professional CAD applications for designing kites and paraglider canopies offer. At Peter Lynn we recognise that, like in motorsports, aerodynamics largely determine performance. This is why we put a lot of effort into reducing turbulence and unwanted drag. In the Aero this translates into the specially shaped panels in the Leading edge. Traditionally each panel is a straight piece of fabric but since it’s impossible to bend a flat surface in cord as well as in span without creating creases and/or folds, our designer has come up with a combination of two pre-shaped panels that allow the top-skin to bulge freely to form a smooth, aerodynamically advanced leading edge. This construction is further complimented with a curved seam that prevents creasing in the area where the LE panels connect to the main canopy panels.

CLEVER INTERNAL DESIGN
The inside of the kite is designed to maximize dimensional stability and to reduce the need for bridle points. The tension straps running along the bottom skin is a technical detail borrowed from the Twinskin/Arc design and ensures proper bulging of the bottom skin while keeping the tension in check. The clever D and H Ribs allow for evenly spaced out bridle points and create a very rigid frame. Strategically placed cross vents ensure fast inflation and even pressure throughout the wing.

HIGH ASPECT RATIO, HIGH CELL COUNT
The high number of cells ensure the wings dimensional stability and prevents deforming of the designed shape. The High Aspect ratio makes the kite cut upwind like a knife and allows for high flying speeds. Each cell has its own aspect ratio to make the wing as efficient as possible and create a highly dimensionally stable wing.

REINFORCED BRIDLE POINTS
As the A bridles get to endure the highest stresses, the bridle tabs for the A row are reinforced with a double stitched Dacron patch for strength. The B and C rows are reinforced with a lightweight round nylon patch to save overall weight.

OPTIMIZED & MINIMAL BRIDLE
The Internal construction allows for evenly spaced out bridle points which in turn allow for a drastic reduction in overall bridle length. As the B and C rows have less stress to endure our designer has tuned each individual line to be as thin and light weight as possible. The bridle itself is constructed out of the highest grade Liros® DC 100% Dyneema® lines.

EFFICIENT TRAILING EDGE
To minimize turbulence along the Trailing edge of the kite, mini ribs have been placed between the ribs. These ribs have been sewn onto a seam that curves into the seam of the adjacent rib, effectively removing a potential weak spot and ensuring a strong construction. To make optimum use of the mini ribs, the Brake bridle point have been moved forward to create a flap, this flap allows you to position the kite with more precision, vastly improving the kite’s downwind performance.

RONSTAN ORBIT PULLEYS
The Aero’s speed system is constructed with 2×2 Ronstan® Orbit pulleys, these high quality pulleys weigh only 9grams and allow for loads up to 250Kg. And since the line goes through the bearing it will always stay connected even in the rare case the pulley gets damaged.

WIND RANGE

SIZES	6	8	10	12	14	15	16	18	21
KNOTS	13-32	11-27	10-25	13-22	9-20	6-17	5-15	5-14	4-12
SIZES	M	M	M	M	M/L	L	L	L	L

AIRTIME
RACE
TURNING SPEED
ENTRY
FREERIDE
WINDRANGE
	1	2	3	4	5	6	7	8	9	10