JP Surf Slate Pro 8'0x30 SUP Board 2017
IN A NUTSHELL...
The super parallel outline of the Surf Slates creates unbelievable speed while at the same time provides generous stability. The short length ensures lightning fast reaction and allows the boards to fit into any size of wave. Use the extra speed to glide across flat sections of the wave or to hit the lip with full power. The double diamond tail allows for instant acceleration and a good amount of drive off the bottom. The tail releases very easily when busting the fins out.
Design details
LIGHTNING FAST
The foot positioning at the tail is crucial for best performance and that is why we added a centered pad arch. The chopped off diamond nose is equipped with a soft channel in the center with bevels on each side for a forgiving “no pearling” entry. This flows into a single concave bottom towards the tail channel for a smooth lift and release. The Surf Slates are more suited to sliding, whippy turns and aerials under a breaking lip, rather than traditional surfing consisting of big carves out on the open face. The boards perform perfect in smaller, sloped surf rather than a large steep wall. A seriously good addition to any quiver.
The boards feature a 5 fin option and come with a RTM thruster set-up. The whole range comes with an FCS plug in the nose to attach your GoPro camera.
Tech specs
| Surf Slate | Length cm / inch |
Width cm / inch |
Volume liters |
Thickness CM / INCH |
Weight KG/LBS | Fins |
|---|---|---|---|---|---|---|
| PRO 7'2"x26" | 219 7'2" |
66 26" |
91 | 10.0 3.9" |
6.1 13.4 | Center R7 [RTM] + 2x Thruster R5 [RTM] |
| PRO 7'2"x28" | 219 7'2" |
71 28" |
103 | 10.8 4.3" |
6.5 14.3 | Center R7 [RTM] + 2x Thruster R7 [RTM] |
| PRO 7'6"x29" | 229 7'6" |
74 29" |
115 | 11.1 4.4" |
7.1 15.7 | Center R7 [RTM] + 2x Thruster R7 [RTM] |
| PRO 8‘0“x30“ | 244 8'0" |
76 30" |
129 | 11.5 4.5" |
7.6 16.8 | Center R7 [RTM] + 2x Thruster R7 [RTM] |
| WE 7'6"x29" | 229 7'6" |
74 29" |
115 | 11.1 4.4" |
8.2 18.1 | Center R7 FCS + 2x Thruster FCS R7 |
| WE 8‘0“x30“ | 244 8'0" |
76 30" |
129 | 11.5 4.5" |
8.7 19.2 | Center R7 FCS + 2x Thruster FCS R7 |
| [RTM] = Resin Transfer Molded |
Weight Tolerance PRO +/-6% WE +/-6% |