F-One Trigger Kite
IN A NUTSHELL...
Boost big, experience pure hangtime and enjoy super smooth landings with the new F-ONE TRIGGER.
Design details
SIZES 6 | 7 | 8 | 9 | 10 | 11 | 12
- 5 struts, high aspect, and flattened arch profile
- Mind-blowing and smooth vertical boost
- Unbelievable and floaty hangtime
- Precise bar feedback
- Remarkable turning radius
- Extensive wind range
Designed for top Big Air performances, this 5-strut kite will blow your mind. Not only will it allow you to send big loops, but its awesome freeride abilities will also send you back upwind effortlessly.
Using our original 5-points connection setup and two pulleys bridles, the TRIGGER is incredibly precise and reactive and will perform in both the high and low end, never letting you down or forcing you to stop your session.
The TRIGGER is the ultimate Big Air weapon to throw huge airs as well as a freeride machine. Designed to perform, its high aspect and five-strut air frame can handle tons of power while offering precise handling for impeccably targeted sends.
Simply pull the bar to enjoy its mind-blowing vertical boost. The resulting hangtime is on point, offering the perfect amount of float and bar feedback to confidently and gently land after a big jump.
The vertical climb is progressive, and the hold on the way down is so good you will confidently try all your tricks. Very effective in Big Air in all conditions and especially on flat water, its vertical traction allows you to jump high without the need of a kicker.
The TRIGGER offers an excellent steering response with light bar pressure and great bar feedback. It is responsive and reactive, achieving a great turning radius with decent speed that feels smooth across the window to send kite loops.
Thanks to that precise bar feedback, you know where the kite is in the air at all times and can easily harness its lifting surface for big accelerations and vertical boosts while fully staying in control. Riding is natural and comfortable with a lateral pull turned into positive traction, and the impressive depower lets you handle any gusts even in the high end.
As we developed this kite, we naturally sought to put forth and capitalize on our extensive expertise to design the finest Big Air kite while staying true to ourselves. We aimed to create a kite that would perform extremely well throughout the entire wind range.
The additional projected area of the TRIGGER allows great float during each jump and soft landings. It gives more traction as well, and coupled with the high aspect, it insures a nice glide and performances in light winds.
The five struts bring impressive stability and full control particularly in the high end, as well as easy and sharp changes in direction. It also allows the smooth transfer of lateral pull into powerful vertical launch, which gives you confidence to keep pushing the limit.
Tech specs
FLAT SEWING
Stronger assembly of the panels: they are now glued and sewn together to make the canopy more rip resistant.
STREAMLINED LEADING EDGE END TIPS
The leading edge tips benefit from a reduced diameter, they are streamlined to lower the drag and equipped with a strap to avoid bridle tangling
VERTICAL STRUT CUT
The kite's struts are designed with a vertical cut in order to optimize the strength / diameter ratio.
KEVLAR® REINFORCEMENT ON LEADING EDGE
Most seams on the leading edge are protected with an abrasion-resistant Kevlar® fabric to prevent the seams from deteriorating when the kite's profile is subjected to aggressive ground friction
ONE PUMP COLLAR VALVE
Easier to remove and put back.
Convenient for bladder replacement.
TEIJIN 130G DACRON RIPSTOP
For over two decades, we have built our kites in the most state-of-the-art cloth from Teijin’s factory in Japan.
They have developed the best technologies and quality material for our kites over the years. Teijin has worked on a few major developments with the double ripstop on the canopy cloth and durability treatments.
The kite industry was lacking choice of cloth density. We could build kites with a 52g per square meter for the canopy and about 160g for the leading edge, strut, and reinforcements. Having only two choices was not easy because on some parts the 52g was too light and the 160g too heavy.
After numerous developments and tests with Teijin, we are now using a new Dacron 130g double ripstop. As a result, we have saved weight while keeping excellent strength. The kite is more reactive and of course feels lighter; that is particularly important for the bigger sizes, especially in light wind or for the turning speed during kite loops.
WINGTIPS KEVLAR REINFORCEMENTS
The wingtips are protected with abrasion-resistant Kevlar® fabric reinforcements.
CNC'D PULLEY
The new, CNC-shaped, anodized aluminum low friction «pulleys” are super lightweight and increase the kite’s reactivity. They also raise the bridle’s resistance to abrasion and its overall durability.