F-One IC6 950 V3 Kite Foil

KITE

• Easier than ever
  
• Versatile, very intuitive, and predictable
  
• Large range of use
  

FRONT WING

Area (cm2) 965
Span (mm) 65
Aspect Ratio 4.4
Weight (kg) 1.33* (wing only)

PLANE ELEMENTS

FRONT WING ALU-IC6 = 950 cm2
STABILIZER IC6 = 300 cm2
ALUMINIUM FUSELAGE = 70 cm

ALU MAST
The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.

The F-One IC6 950 V3 is designed for anyone looking for a first foil purchase or simply for a versatile setup able to deliver tons of fun on the water.

Made in our specific technology called Injected Carbon, our wings and stabilizers are very tough and very durable. This technology makes our IC6 wings a lot more ding resistant than conventional carbon wings. The front wing has a metal insert at its core to provide extra resistance and better stiffness. The wing is bolted to the fuselage using two in-line and two offseted screws, resulting in a connection geometry that ensures a very solid and stiff assembly.

The fuselage and mast are made of aluminium. The mast plugs directly into the fuselage and, at the top, a 4-bolt plate that can be plugged in to get the foil compatible with any board fitted with tracks. Alternatively, a selection of optional standards like KF, DeepKF or Tuttle heads is also available.

This foil is not only versatile but it’s also very intuitive and predictable. The take-off is really progressive, the ride in the air super smooth. You have complete control on the speed and on your path.

The latest front wing design is 950cm². It has been refined from the previous versions to extend the range of use. With more lift, the IC6 V3 is easier than ever to learn on and have fun whatever your foiling level. Using careful design, it can fly at very low speed but it can also accelerate with great maneuverability and a fantastic carving potential.

IC6 INJECTED CARBON
The IC6 Technology consists in an injected polymer reinforced with carbon fibers. This material is very strong and shows some impressive mechanical properties making it particularly suited for parts subjected to high stresses and bending loads.

ALUMINIUM 6063 &6061
This aluminium alloy boasts some very good mechanical properties and can be processed in many different ways while also offering a natural resistance to corrosion. Produced from an extrusion process, our aluminium profiles make the most of this homogeneous material to provide perfect stiffness both in torsion and bending. All areas in contact with other metals or carbon parts are duly isolated against galvanic reactions.

IC6 950 V3

TAKE OFF
STABILITY
CARVING
PERFORMANCE