Fanatic Falcon HRS SUP Board 2014
The new Falcon Race is quite simply built for speed.
Sizes: 12'6"x27.25" | 12'6"x30" | 14'0"x27.25" | 14'0"x30"
The same board that has taken World Champions Angela Jackson, Olivia Piana and Chase Kosterlitz across the finish line can fly under your feet. With a revolutionary bow shape and adjusted scoop line, the Falcon Race is faster and more stable than ever before.
With a SUP race scene that’s experienced exponential world-wide growth over the last few years, Fanatic has concentrated vast effort into tuning four new race shapes, as well as the two proven 30˝ shapes. Testing was conducted all over the world – from Australia, to Florida, to Maui, to ensure these boards work as well in choppy ocean swell as they do in flat water. Special attention was made to ensure simple, easy foot steering in cross-wind and chop. The rails were designed with a unique goal in mind: to offer stability high on the rail, but reduce wetted surface at the bottom once paddling. The board truly lifts out of the water as you pick up speed, giving you that extra bit of glide to accelerate down the face, up and over the front of the next wave.
The cutting bow has been eliminated, the nose outline was integrated into the new design and is quite a bit wider now. The new bow design ensures that the nose never catches or develops any self-steering. Added volume prevents the board from pearling so it always stays above the water. The 2014 Falcon performs in flat water to chop to downwind runners. So all you need to do is match your body weight to the appropriate width Falcon.
ONE RaceAce Fin: The 9.75˝ RaceAce has been developed for race and touring board shapes in any conditions. It’s a fast foil with solid tracking, minimum draft and optimum entry rake angle that glides through weed or kelp. ONE fin technologies utilize high-modulus, pre-impregnated, heat cured, twill leave carbon fiber fabric that creates exceptional strength-to-weightratio and delivers a high-density, impact-resistant ABS edge.
*Drop shape outline with stabilizing square tail and increased nose width *Domed nose with added volume for quick nose recovery and water dispersion *Flat angled deck shape for secured stance and water release. Volume pulled out all the way to the rail *Hard release edges from center to tail, for maximum stability and clean water release *Clean open deck for easy maneuvering and kick turns *All models come with the super light ONE 9.75˝ RaceAce fin *New non-catching bow design *CAD analyzed surfaces and curve flow
HIGH RESISTANCE SKIN (HRS) High resistance composite technology – an optimum weight and durable construction for everyday use. A thick, durable outer skin gives the board hull a high strength, ding and impact resistance. Strategic use of glass reinforcements ensures an adequate stiffness. Used on the ProWave HRS, AllWave HRS, Ray, Fly HRS, Falcon HRS as well as on the Ripper with a kids-friendly EVA deck.